Hotwater System Common Problems

In Australia, hotwater system has been a great necessity of people particularly during winter season. It requires proper installation and maintenance in order to run smoothly. A hot water system supplies between 50-90 percent water depending on your local climate and model. It usually comes with gas or electric boosters to sustain a homeowner’s water needs.

Although proper maintenance is being applied, some problems occur without you knowing it. Let’s take a look at the common problems of hotwater system;

• Not supplying hot water
• Insufficient hot water
• Rust water and rotten odour
• Unwanted noise
• Higher pitched whining
• Water leaks on certain part of the heater

These problems might be because of the following;

• Defective pilot
• Water heater unit is undersized
• Damaged tube that causes water to mix inside the tank
• Not properly installed and connected
• Control problems
• Corrosion inside the tank
• Anode rod is not working properly
• Bacteria and decay
• Excessive buildup of sediment
• Faulty temperature and pressure
• Valve leak

For instance, in case these problems occurred, it is important to take necessary precautions and safety prior to making any troubleshooting. One must take the following steps;

1. Turn off your electric water heater such as the breaker or fuse
2. Shut the water supply down
3. Set the gas pilot valve to “PILOT” mode.

Aside from several benefits that a hot water system can give, it’s becoming a standard in Australia as well. Some cities are requiring gas-boosted hot water system which shows that hot water will be the new normal. So for homeowners and businesses, they shouldn’t wait until their hot water system goes. 

Problem with your hot water system? Call The Plumber Perth now! Your reliable hotwater Perth Company ready to assist you on your gas hot water systems, electric hot water systems & solar water systems needs. For more information, call 0403 872 640 and look for Paul for fast service and assistance.

Hot Water Installation And Repair Information

If you have installed a hot water system in your home, it is important that it should be serviced and repaired by fully qualified professional. Having a regular maintenance will not only extend the life of your hot water fixtures but also allows you to save money and time.

In Australia, hot water is a necessity and a way to take advantage of the abundant supply of sun and water for every household. Moreover, there are available solar panel systems to save energy and therefore reduce the water heating expenditures. Solar based water heater can provide outstanding benefits and can supply for up to 50-90% of a household needs.

Replacement And Installation

Hot water system requires periodic maintenance and most of the time, it is being disregarded and used without appropriate maintenance that causes corrosion and rust until the problem comes in.

Water leakage is one of the major problems of hot water system. If this occurs, immediate replacement must be required. Water heaters usually last for 15 years. You can choose between gas hot water system and electric water system and make sure to check its gallon capacity, recovery rate, dimension and energy efficiency.

Here are some important guidelines in case problem occurs:

• Check if the power is properly attached. Reset the thermostat.

• Remove tank sediments by flushing the heater

• Replace the heating elements

• Insulate pipes

• Check gas connection and pilot light

• Increase temperature setting on thermostat

• Clean and replace burner and thermocoupler

Hire A Professional

Hiring a professional plumber to manage your heating system is very crucial to ensure the safety and accuracy of installation. But if you choose to do it on your own, make sure you are fully aware with the plumbing codes as well as the necessary requirements involving it. Might as well research or ask your local plumbing inspector.

What Hot Water Professional Do?

1. Delivery and unpacking of your hot water system.

2. Check damage and defects

3. Provide the best recommendations and estimate

4. Ensure that installation is code-approved

5. Ensure level and safety of installation with manufacturer-supplied safety hardware.

6. Conduct testing on water heating system and treatment to ensure its performance.

7. Provide clients with easy to understand instructions and information.

8. Provide warranty and back up

9. Cleaning and maintenance service

If you need more information about hot water system and installation in Australia, you may contact Hotwater Perth Company. Rest assured, their service comes with a comprehensive warranty, quality and accuracy.

Hot Water Installation - How To Find The Right Installer In Australia?

Hot water is very important and can be considered as a basic necessity for every Australian homeowner. It is designed to use for bathe, washing dishes or during laundry. Buying the right hot water system for your home will guarantee an enough supply of hot water to manage your regular household usage.

Hot water installation requires the right expertise and skills in order for it to run efficiently. Moreover, hot water system in Australia is being managed by experts and professional plumbers with extensive experience in this type of service. Water heaters can be fuelled by electricity or natural gas and it can be categorized as traditional water heaters or tankless water heaters.

There are tons of companies that offer hot water installation service particularly in Australia. That said, it is important for consumers to select or hire the right company to handle the plumbing plan, materials and the installation itself. 

Here are some pointers when choosing the right hot water professional:

1. The installer must be involved in a team of professional and certified Australian owned hot water company with great experience. These experts must be a group of licensed personnel that can give you a reliable service to meet and exceed your expectations.
2. Find a highly skilled and experience plumber/installer who can advise you on what would be the best hot water system to include on your home. They can provide the best solutions for your domestic or commercial hot water requirements. 
3. Find a team who can work closely to your needs and therefore provide the best solution in case of problems and repairs.
4. Find a reliable team who work with trusted suppliers who can be able to offer a range of latest hot water systems and hot water technologies at a competitive rate.
5. Find a company with a good feedback ad reputation which is built through the years because of their prompt, affordable and quality service.
6. Choose a servicing company who offers warranty for their entire leading brand and make sure that they are an accredited company whom you can trust.
7. Since most of this company has their own website, you can visit them online to check reviews, FAQ’s, some relevant information or contact them via their provided phone number for questions and inquiries.

Above all, make sure that the company you are dealing with can provide an utmost customer care that can cater your needs and the ones that can assist you with troubleshooting or anything that requires their help concerning the hot water system.

If you are looking for a hotwater Perth based company, you may contact THE HOT WATER, trusted and reliable local Plumber in Perth. Call 0403 872 640 for more information.